2CP-8CP SCR Power Controls
CP Multi-Zone SCR Power Controls
FEATURES
Multi-Zone Phase Angle Fired SCR Power ControlsStandard Control Signal 4-20 mA
The Avatar Series CP Multi-zone SCR Power Control provides individual control of up to six single phase heaters/zones in one rugged, space saving device. Each zone command signal independent of the others. No phase rotation or load balancing restrictions. No Signal Transformer needed. All units come as assembled units. Fuses are optional.
For use with resistive heater loads.
- Multi-zone phase angle fired or zero voltage switched
- Grounded heatsink and isolated SCR's
- 2 to 8 zone packages available
- Space saving design
- 10-1200 Ampere output to 600 Volts
- No transformers to wire up
- Single & 3 phase packages
- Optional soft start & voltage limit
available on phase angle units
C_____-______-_______-_______-_______-_______
Zones Firing Voltage Amperes Options Options
ZONE DESIGNATIONS
2, 3, 4*, 5*, 6*, 8**
*Up to 100 Amps only
**Up to 20 Amps only
METHOD OF FIRING
Phase Angle Fired (P)
Zero Voltage Switched (Z)
VOLTAGE DESIGNATIONS
120 VAC 50-60Hz (12)
208-240 VAC 50-60Hz (24)
277 VAC 50-60Hz (27)
380 VAC 50-60Hz (38)
480 VAC 50-60Hz (48)
575 VAC 50-60Hz (57)
600 VAC 50-60Hz (60)
LOAD IN AMPS
10, 15, 20, 30, 40, 50, 60, 70, 80, 100, 150, 200, 225, 250, 350, 600, 1200
Ordering Note: 150-1200 Amp units only available in 2 or 3 legs. PHASE ANGLE OPTIONS: Soft Start Current Limit (CL) Voltage Limit ZERO VOLTAGE SWITCHED OPTIONS: R Option 3-PHASE CONTROL OPTIONS: 2-leg zero voltage switched A3Z style, add “-2Z” to part number. 3-leg zero voltage switched A6Z style, add “-3Z” to part number. 3-leg phase angle fired, A3P style, add “3P” to part number. For 4-wire 3-phase angle fired, use standard single phase controlled leg, wiring the three control circuit cards 4-20mA command signal in series. Ordering Example: 6CP-48-70-VL25 is a six zone, single phase (per zone), phase angle fired, 480VAC, 70 Amp SCR power controller. |
